Product Description Paintex Putty (water based) is an economical ready to use filler that has excellent whiteness, coverage and application properties Product has in-can redeemable coupon: Rs 50 in Gallon and Rs 200 in Bulk Pack Application Description Apply 2-3 coats of Paintex Putty (water based) and leave for 2-3 hours between coats. Health & safety Hazard warnings Keep out of reach of children. Keep away from sources of ignition. In case of fire use foam, dry powder, AFFF or CO2 fire extinguisher. Never use water. Keep container tightly closed and upright to prevent leakage when not in use. Avoid contact with eyes and skin. When applying paint it is advisable to wear eye protection and gloves. Repeated exposure may cause skin dryness or cracking. In case of contact with eyes rinse immediately with plenty of water keeping eyelids apart and seek medical advice. Remove splashes from skin, use soap and water or a recognized skin cleaner. Work only in areas of good ventilation. When using inside, always keep doors and windows fully open during application and drying. A suitable cartridge mask should be worn when rubbing down. The product is harmful if swallowed; seek medical advice. Dry sanding, flame cutting and or welding of the dry paint film will give rise to dust and or hazardous fumes. Wet sanding should be used wherever possible. If exposure cannot be avoided by the provision of local exhaust ventilation, suitable respiratory protective equipment should be used. Do not breathe vapour or sanding dust. The product is toxic by inhalation. If inhalation causes physical discomfort, move to fresh air. If discomfort persists or any breathing difficulty occurs, seek medical advice & show container label. Care must be taken when transporting paint. Do not store by hanging on a hook. Protect from extremes of temperature. Store in a cool and dry place. In the event of an accident, collect spillage using sand or earth. Do not empty into drains or watercourses as product is very toxic to aquatic organisms and may cause long term adverse effects in the aquatic environment. Dispose of any paint waste in accordance with the appropriate environment quality regulations. Safety Data Sheet available for professional users on request. The product container is only for paint use.
Product Description Paintex Putty (water based) is an economical ready to use filler that has excellent whiteness, coverage and application properties Product has in-can redeemable coupon: Rs 50 in Gallon and Rs 200 in Bulk Pack Application Description Apply 2-3 coats of Paintex Putty (water based) and leave for 2-3 hours between coats. Health & safety Hazard warnings Keep out of reach of children. Keep away from sources of ignition. In case of fire use foam, dry powder, AFFF or CO2 fire extinguisher. Never use water. Keep container tightly closed and upright to prevent leakage when not in use. Avoid contact with eyes and skin. When applying paint it is advisable to wear eye protection and gloves. Repeated exposure may cause skin dryness or cracking. In case of contact with eyes rinse immediately with plenty of water keeping eyelids apart and seek medical advice. Remove splashes from skin, use soap and water or a recognized skin cleaner. Work only in areas of good ventilation. When using inside, always keep doors and windows fully open during application and drying. A suitable cartridge mask should be worn when rubbing down. The product is harmful if swallowed; seek medical advice. Dry sanding, flame cutting and or welding of the dry paint film will give rise to dust and or hazardous fumes. Wet sanding should be used wherever possible. If exposure cannot be avoided by the provision of local exhaust ventilation, suitable respiratory protective equipment should be used. Do not breathe vapour or sanding dust. The product is toxic by inhalation. If inhalation causes physical discomfort, move to fresh air. If discomfort persists or any breathing difficulty occurs, seek medical advice & show container label. Care must be taken when transporting paint. Do not store by hanging on a hook. Protect from extremes of temperature. Store in a cool and dry place. In the event of an accident, collect spillage using sand or earth. Do not empty into drains or watercourses as product is very toxic to aquatic organisms and may cause long term adverse effects in the aquatic environment. Dispose of any paint waste in accordance with the appropriate environment quality regulations. Safety Data Sheet available for professional users on request. The product container is only for paint use.
Product Description Dulux Promise Putty (water based) is ready to use filler that has an excellent whiteness, coverage and application properties. Its high quality filling properties has made it ideal for use on all types of interior masonry surfaces. It provides a smooth base for top coat application of all Decorative products. Dulux Promise Putty is not recommended for exterior use. Application Description Allow the filler to dry for 2-3 hours and apply second coat of Putty
Product Description Dulux Promise Putty (water based) is ready to use filler that has an excellent whiteness, coverage and application properties. Its high quality filling properties has made it ideal for use on all types of interior masonry surfaces. It provides a smooth base for top coat application of all Decorative products. Dulux Promise Putty is not recommended for exterior use. Application Description Allow the filler to dry for 2-3 hours and apply second coat of Putty
Diamond Value Wall Putty is heavily pigmented PVA based filler for surface preparation. Recommended use: To fill pores and imperfection of plaster, concrete and gypsum surfaces & give primer surface for final application. The product is easy to apply with brush and provides ideal finish for subsequent coat. Surface Preparation: All loose material including loose plaster, cement splashes, old paint, dust, dirt etc. must be thoroughly removed. New plaster / concrete must be fully cured.
Diamond Value Wall Putty is heavily pigmented PVA based filler for surface preparation. Recommended use: To fill pores and imperfection of plaster, concrete and gypsum surfaces & give primer surface for final application. The product is easy to apply with brush and provides ideal finish for subsequent coat. Surface Preparation: All loose material including loose plaster, cement splashes, old paint, dust, dirt etc. must be thoroughly removed. New plaster / concrete must be fully cured.
Diamond Value Wall Putty is heavily pigmented PVA based filler for surface preparation. Recommended use: To fill pores and imperfection of plaster, concrete and gypsum surfaces & give primer surface for final application. The product is easy to apply with brush and provides ideal finish for subsequent coat. Surface Preparation: All loose material including loose plaster, cement splashes, old paint, dust, dirt etc. must be thoroughly removed. New plaster / concrete must be fully cured.
Diamond Everlast Putty is heavily pigmented PVA based filler for surface preparation. Recommended use: To fill pores and imperfections of plaster, concrete, wooden and gypsum surfaces & give primer surface for the final application. The product is easy to apply with brush and provides ideal finish for subsequent coats. Surface Preparation: All loose material including loose plaster, cement, splashes, old paint, dust etc. must be thoroughly removed. New plaster/concrete must be fully curved.
High-quality water-based putty, easy and smooth to apply. Providing ideal surface for subsequent coats. Product Features Interior use, to fill pores and imperfections of wooden, plaster, concrete and gypsum surfaces. Excellent filling properties. Very good adhesion and standability Very low VOC content.
High-quality water-based putty, easy and smooth to apply. Providing ideal surface for subsequent coats. Product Features Interior use, to fill pores and imperfections of wooden, plaster, concrete and gypsum surfaces. Excellent filling properties. Very good adhesion and standability Very low VOC content.